Instruction Manual

ManualsBrandsRice Lake ManualsScalesRoughDeck and iQUBE2 Rough-n-Ready System Addendum

November 18, 2014 157118

Rough-n-Ready System

VIRTUi

2®

Installation Instructions

PNs 155626, 155628, 155629, 155630, 155631, 155631

The Rough-n-Ready System is comprised of three components: a RoughDeck

floor scale, an iQUBE

2®

j-box and

the VIRTUi

software to be installed on a PC. Use the following instructions as a guide to set up the system.

RoughDeck Scale

VURTUi

Software

iQUBE

J-Box

USB Serial

Adapter Cable

Figure 1. Parts Included in Rough-n-Ready System

Note

W ARNING

Do not install or work on this equipment unless you have read and understand the instructions and

warnings in the manuals included. Failure to follow the instructions or heed the warnings could result in

injury. Contact any Rice Lake Weighing Systems dealer for replacement manuals.

If a field installation is being done, install Virtui2 on the PC prior to going into the field. An Internet connection

is required to download the program.

1. Install the RoughDeck floor scale (see RoughDeck manual, PN 66662).

2. Remotely install the iQUBE

(see iQUBE

Manual, PN 106113).

3. Install the VIRTUi

program on a PC.

• Connect to ricelake.com t

o download the software

• Install according to the software instruc

tions

4. Connect the iQube

to the PC using the USB serial adapter cable.

5. Open VIRTUi

Configuration.

Summary of content (4 pages)

PAGE 1
Rough-n-Ready System 2® VIRTUi Installation Instructions PNs 155626, 155628, 155629, 155630, 155631, 155631 The Rough-n-Ready System is comprised of three components: a RoughDeck® floor scale, an iQUBE2® j-box and the VIRTUi2 software to be installed on a PC. Use the following instructions as a guide to set up the system. RoughDeck Scale iQUBE2 J-Box VURTUi2 Software USB Serial Adapter Cable Figure 1.
PAGE 2
6. Select File, then Login Login Logout Export Configuration Import Configuration User Manager Exit Figure 2. Login Screen 7. Enter username: Administrator Administrator Figure 3.
PAGE 3
8. Select OK, a popup appears in lower right area of the screen that indicates the connection was successful. Figure 4. Connection Successful 9. Select Communication, then Connect to connect to the iQUBE2. Connect Disconnect Send Configuration to iQube2 Get Configuration from iQube2 Figure 5. Connect to the iQUBE2 10. Select Communication, then Get Configuration from iQUBE2. A popup will appear showing the progress of the upload. 11. Select File, then Exit to close the program. Select Save when asked.
PAGE 4
12. Open the Virtui Viewer. 13. Select File, then Login. 14. Enter username: Administrator 15. Enter license number obtained from Rice Lake Weighing Systems. Note To obtain a license number call 800-472-6703 between 6:30 am and 6:30 pm CST and ask for inside sales. The Rough-n-Ready system is now ready to begin weighing. 230 W. Coleman St. • Rice Lake, WI 54868 • USA U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319 www.ricelake.com www.ricelake.