Technical Specifications
Essential
Essential electric water heaters are engineered for longer life –
resistored heating elements and premium grade anode rod
RichmondWaterHeaters.com
RICHMOND
®
WATER HEATERS
In keeping with its policy of continuous progress and product improvement, Richmond reserves the right to make changes without notice.
Richmond Water Heaters • 1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076
© Rheem Manufacturing Company •
02/18
•
FORM NO. T-641 Rev. 6
Essential
28, 30, 36, 38, 40, 47 and
50-Gallon Capacities
240 Volt AC/Single Phase
Electric
EFFICIENCY
• .90 - .93 UEF
• Isolated tank design reduces conductive
heat loss
• 4500 Watt resistored copper elements
to prolong anode rod and tank life
PERFORMANCE
• FHR: 45 - 63 gallons, based on gallon
capacity
• Recovery: 21 GPH at a 90° F rise
LONGER LIFE
• Premium grade anode rod provides
long-lasting tank protection
FEATURES
• Electric junction box located above
heating elements for easy installation
• Over-temperature protector cuts off
power in excess temperature situations
• Automatic thermostat keeps water at
desired temperature
PLUS…
• EverKleen
™
self cleaning device ghts
harmful sediment build-up with a
high- velocity spiraling water stream
– helps operating efciency by saving
energy, money and improving tank life
• Temperature and pressure relief valve
included
• HUD certied for manufactured
housing and modular construction
• Low lead compliant
WARRANTY
• 6-Year limited tank and parts warranty*
* See Residential Warranty Certicate for complete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meet or exceed the energy efciency requirements of
NAECA, ASHRAE standard 90, ICC Code and all state
energy efciency performance criteria.
Ask about
LEED Points
C
DIAMETER
A
B
HOT
WATER
CONNECTION
COLD
WATER
CONNECTION
ANODE
ROD
RELIEF VALVE
CONNECTION
8"
WATER CONNECTIONS ALL 3/4" N.P.T.
Uniform Energy Factor and rated gallon capacity based on Department of Energy (DOE) requirements.
** Water heater dimensions prior to installing insulation blanket that is included with water heater
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specically requested.
• Single element models available on special order (6000W max.). Substitute “1” for “2” in model number.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
• All models equipped with heat traps.
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T
Y
P
E
NOMINAL
GALLON
CAPACITY
RATED
GALLON
CAPACITY
MODEL
NUMBER
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H.
90° F RISE
TANK
HEIGHT
A
HEIGHT TO
WATER CONN.
B
DIAMETER
C
APPROX.
SHIP WT.
(LBS.)
UNIFORM
ENERGY
FACTOR
(UEF)
ESTIMATED
YEARLY
ENERGY
COST
Tall 30 27 6E30-D 46 21 47-1/2 50-3/8 19-3/4 92 0.92 $293
Tall 40 36 6E40-D 55 21 60-3/4 63-5/8 19-1/4 109 0.93 $419
Tall 50 45 6E50-D 63 21 58-5/8 61-5/8 20-3/8 121 0.93 $419
Med. 30 27 6EM30-D 45 21 37-1/2 40-1/2 20-1/4 92 0.90 $299
Med. 40 36 6EM40-D 55 21 48-3/8 50-1/2 20-1/4 106 0.93 $419
Med. 50 45 6EM50-D 62 21 48 50-1/2 23 132 0.93 $419
Short 28 25 6ES30-D 45 21 30 31-1/8 23 95 0.92 $293
Short 30 27 6ESB30-2** 46 21 30-1/8 32 19-3/4 95 0.92 $293
Short 36 33 6ES40-D 46 21 31-1/2 33 24-1/4 118 0.92 $293
Short 38 35 6ESB40-2** 51 21 31-1/2 32-5/8 23 108 0.92 $424
Short 47 43 6ES50-D 54 21 32 32 26-1/4 148 0.93 $419
Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
Recovery calculations used are
based on 4500 watt elements used in
non-simultaneous operation.