Copier 850, 1050

Setting Originals

B Set the first page of your original face down on the exposure glass and align

it to the rear left corner.

1: Reference mark

2: Scale

C Lower the document feeder.

Setting Originals in the Document Feeder

Note

❒

The last page should be on the bottom.

❒

Do not stack originals beyond the limit mark on the side fence of the docu-

ment feeder.

❒

When copying thin originals (40 – 52 g/m

, 11 – 14 lb, Bond), set one page at

a time in the document feeder or on the exposure glass to avoid damage due

to multi-sheet feeds (several pages fed together at the same time).

❒

Originals in pencil or other similar media may get slightly smudged after be-

ing scanned through the ADF. To avoid this, you can set them on the expo-

sure glass instead.

❒

As a rule, one-sided originals are delivered to the ADF external tray, and two-

sided originals to the ADF tray.

Reference

For originals that the document feeder can handle, see

⇒

P.15

“Originals”

To set a stack of originals in the document feeder

A Adjust the guide to the original size.

ND1C01EE