All in One Printer User Manual

If You Cannot Make Copies As You Want
171
4
Adjust Image
Stamp
Problem Cause Action
In Double Copies mode, parts
of the original image are not
copied.
Combination of original and
copy paper is not correct.
Select A3L for A4 originals
K, A4 for A5 originals, and B5
for B6 originals. ⇒ P.110
“Double Copies”.
In Border, Center, or Center/
Border mode, parts of the
original image are not copied.
You set the wide erased mar-
gin.
Change the margin width nar-
rower. You can change it be-
tween 2-99mm. ⇒ “Erase
Border Width” and “Erase
Center Width” in P.216 “Edit
1
/
2
”.
Set the originals correctly.
Originals are not scanned cor-
rectly.
In Margin Adjustment mode,
parts of the original image are
not copied.
You set the wide erased mar-
gin.
Set the narrow margin with
the User Tools. ⇒ “Front Mar-
gin: Left/Right” and “Back
Margin: Left/Right” in P.216
“Edit
1
/
2
”.
There is a lock of margin space
on the opposite side of the
binding position.
In Image Repeat mode, the
original image is not copied
repeatedly.
You selected the same size
copy paper as originals, and
did not select the proper re-
production ratio.
Select copy paper larger than
the originals.
Select the proper reproduc-
tion ratio.
Problem Cause Action
The stamp position is wrong. The paper orientation is
wrong.
Check the paper orientation
and stamp position.
AdonisC2_AEcopy110F_FM.book Page 171 Wednesday, October 3, 2001 1:43 PM