Owner's Manual

Error and Status Indicate on the Control Panel
Messages on the Screen
Message Causes Solutions
Misfeed: Stnd. Tray
Out of Paper
Paper has been jammed in the
paper tray.
The input tray has run out of
paper.
• Remove the jammed paper. See p.97
"Maintaining the Machine".
• Load paper to the input tray. See
p.20 "Loading Paper".
Misfeed: Inner/
Outer
Paper has been jammed in the
machine.
• Remove the jammed paper. See
p.104 "Paper Feed Problems".
Misfeed: ADF
Open Cov. Rmv.
Paper
An original has been jammed
inside the ADF.
• Remove jammed originals, and then
place them again. See p.104 "Paper
Feed Problems".
• Check the originals are suitable for
scanning. See p.25 "Placing
Originals".
Set Correct Size Ppr
Press Start or Stop
The paper for making copies,
printing faxes or Auto Report is
not loaded.
Load the appropriate size paper.
Set Correct Size Ppr
Press Start to Print
The paper for printing fax or
Auto Report is not loaded.
Load A4 or Letter size paper in the input
tray.
Cover Open A cover is open. Close the maintenance cover completely.
Memory Overflow
Press Start or Stop
Memory has reached capacity
during sort copy.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
Cannot Print Fax
Change Paper Size
An appropriate size paper for
printing faxes is not loaded.
Load A4 or Letter size paper in the input
tray.
Cannot Print
Open Front Cover
Front cover is closed. Open the front cover completely.
10. Troubleshooting
118