Owner's Manual

Message Causes Solutions
Cannot Print
Memory Overflow
The data is too large or
complex to print.
Select [600 x 600 dpi] in [Resolution] to
reduce the size of data. For details, see the
Printer Driver Help.
Paper Size Mismatch
Press Start or Stop
The paper size set for the
document differs from the size of
the paper.
Press the [Start] key to begin printing, or
press the [Clear/Stop] key to cancel the
job.
Paper Type
Mismatch
Press Start or Stop
The paper type set for the
document differs from the type
of the paper.
Press the [Start] key to begin printing, or
press the [Clear/Stop] key to cancel the
job.
Scan USB Disconnect
The USB cable was
disconnected while scanning
from a computer.
Reconnect the USB cable properly, and
then try the operation again.
Fax Job Memory
Over
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
No Destination The fax could not be sent.
Confirm that the destination is a fax
machine.
Numbers Do not
Match
The fax could not be sent.
Confirm that the fax number you dialed is
correct.
Cannot Copy
Change Paper Size
An appropriate size paper for
making copies is not loaded.
Load the appropriate size paper.
10. Troubleshooting
120