Owner's Manual

2. Place the original on the exposure glass or in the ADF.

3. Press the [Speed Dial] key.

CHZ958

4. Enter the Speed Dial number using the number keys, and then press the [OK] key.

5. Press the [Start] key.

CHZ962

When you place original on the exposure glass and Memory Transmission mode is enabled,

perform the following steps to scan the subsequent pages of the original.

6. If you have more originals to scan, press the [1] key within 60 seconds, place the next

original on the exposure glass, and then press the [OK] key. Repeat this step until all

originals are scanned.

7. When all originals have been scanned, press the [2] key to start sending the fax.

Specifying the destination using the broadcast function

You can send a fax to multiple destinations simultaneously.

1. Make sure that the fax mode screen is displayed.

When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax

mode screen.

Sending a Fax