Owner's Manual

Pause Time
Specifies the length of pause time when a pause is inserted between the digits of a fax
number.
Default: 3 seconds
• 1 to 15 seconds, in 1 second increments
Auto Redial
Sets the machine to redial the fax destination automatically when the line is busy or a
transmission error occurs.
Default: [On]
• Off
• On
If [Auto Redial] is set to [On], the redial count and interval can be specified.
The redial count is 3 times.
The redial interval is 5 minutes.
Print Fax Header
Sets the machine to add a header to every fax you send. The header includes the current date
and time, user fax name and number, Session number, and page information.
Default: [On]
• Off
• On
RX Settings
Switch RX Mode
Specifies the reception mode.
Default: [Auto]
• Auto
The machine automatically answers all incoming calls in fax reception mode.
• Manual
The machine rings when it receives incoming calls. The machine receives faxes only
when you manually receive faxes.
Auto Reduction
Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet
of paper.
Note that the machine only reduces the size down to maximum by 74%. If further reduction is
required to fit the fax on a single sheet, it will be printed on separate sheets without being
reduced.
Fax Features Settings
79