Owner's Manual

• Minute: 0 to 59

Program Fax Info.

Specifies the user information for sending a fax.

• Own Fax Number

Specifies the fax number of the machine using up to 20 characters, including 0 to 9, space,

and "+".

• Own Name

Specifies the name of the machine using up to 20 characters.

Function Priority

Specifies the mode that is activated when the power is turned on.

Default: [Copier]

• Copier

• Facsimile

Energy Saver Mode

Sets the machine to enter Energy Saver Mode, Energy Saver Mode 1 or Energy Saver Mode 2, to

reduce power consumption. The machine recovers from Energy Saver Mode when it receives a

print job, prints a received fax, TWAIN scan directions from the computer, or when the any key is

pressed.

Energy Saver Mode 1

The machine enters Energy Saver Mode 1 if the machine has been idle for about 30 seconds.

It takes less time to recover from Energy Saver Mode 1 than from power-off state or Energy

Saver Mode 2, but power consumption is higher in Energy Saver Mode 1 than in Energy

Saver Mode 2.

Default: [Off]

• Off

• On

Energy Saver Mode 2

The machine enters Energy Saver Mode 2 after the period of time specified for this setting has

passed. The machine consumes less power in Energy Saver Mode 2 than in Energy Saver

Mode 1, but it takes longer to recover from Energy Saver Mode 2 than from Energy Saver

Mode 1.

Default: [On] (1 minute)

• On (1 to 30 minutes, in 1 minute increments)

Language

Specifies the language used on the screen and in reports.

System Settings