User's Manual

Table Of Contents
5. [Energy Saver] key
Press to switch the machine into and out of Low Power mode.
See “Saving Energy”.
6. [Clear Modes] key
Press to clear previously entered print job settings.
7. [Stop] key
Press to stop a job in progress.
8. [Start] key
Press to start printing.
9. [Clear] key
Press to delete an entered number.
10. [ ] key (Enter key)
Press to enter a numerical value.
11. Number keys
Use to enter the numbers.
12. Data In indicator (printer mode)
Lights up when the printer is receiving data.
13. [Registered Program] key/[Other Function] key
Calls up registered functions.
14. Function status indicators
Show the status of the printer function.
Green: active.
Red: interrupted. Press the function key to change the display, and then follow the instructions that appear.
15. Function keys
Press to display the operation screen of a printer function.
16. [Counter] Key
Press to check or print the total number of copies made.
See “Counter”, General Settings Guide.
17. [User Tools] key
Press to change the default settings and conditions to meet your requirements.
See “Accessing User Tools (System Settings)”, General Settings Guide.
18. [Tray Paper Settings] key
Specify settings for the tray to which prints are delivered.
19. Display panel
Shows function menus, error messages, and the machine's operation status.
You can adjust the angle of the control panel.
2
24
Draft 2008/02/07