User's Manual

Table Of Contents
Turning On/Off the Power
This section discusses how to turn on/off the power.
Power supply
This machine has two power switches: operation switch and main power switch.
Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up, you can make use of each
function.
Main power switch (internal left side of the machine)
Turning off this switch makes the main power indicator on the right side of the control panel go off. When
this is done, machine power is completely off. When the fax unit (optional) is installed, fax files in memory
may be lost if you turn this switch off. Use this switch only when necessary.
This machine automatically enters Energy Saver mode or turns itself off if you do not use it for a while. To specify the time that the machine
waits before it enters Energy Saver mode and/or turns itself off, configure the Energy Saver Timer and/or Auto Off Timer setting,
respectively. See “System Settings”, General Settings Guide.
Turning On the Main Power
This section explains how to turn on the main power.
Do not turn off the main power switch immediately after turning it on. Doing so may result in damage to the hard disk or memory, leading
to malfunctions.
After turning off the main power switch, wait for two minutes or more before turning it on again.
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the front left cover.
3. Turn on the main power switch.
The main power indicator goes on.
BKA007S
4. Close the front left cover.
After you switch the main power on, a screen may appear to indicate that the machine is initializing. Do not switch the power off during
this process. Initialization takes about three minutes.
1
31
Draft 2008/02/07