User's Manual

Saving Energy
This section explains the machine's energy saving functions.
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the [Energy Saver]
key, the display disappears and the machine goes into Energy Saver mode. When you press the [Energy
Saver] key again, the machine returns to the ready condition. The machine uses less electricity in Energy
Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after copying
has finished or the last operation is performed under Energy Saver Timer.
Auto Off
The machine automatically turns itself off when the job is finished, after a certain period of time has elapsed.
This function is called “Auto Off”.
You can change the Auto Off time under Auto Off Timer.
• See “System Settings”, General Settings Guide.
• The Energy Saver and Auto Off functions will not operate in the following cases:
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the cover is open
• When the "Add Toner" message appears
• When toner is being replenished
• When the User Tools screen is displayed
• When fixed warm-up is in progress
• When data is being processed
• When operations are suspended during printing
• When a recipient is being registered in the address list or group dial list
• When the Data In indicator is on or blinking
• When the screen of stored document under the printer function is displayed
• When the internal cooling fan is active
4
34
Draft 2008/02/07