MSDS

ManualsBrandsRidgid Tool ManualsChemicals & Cleaning SuppliesDark Thread Cutting Oil

Page 1 of 11

MATERIAL SAFETY DATA SHEET

Section 1 – Product & Company Identification

Product Name ........................ : RIDGID Dark Thread Cutting Oil

Product Catalog No. ............... : 41590, 70830, 41610, 41600

Company Name ..................... : Ridge Tool Company

Address .................................. : 400 Clark Street

: Elyria, Ohio 44035-6001

Telephone .............................. : 1-800-519-3456 (USA) (8:00 am – 5:00 pm EST, M-F)

Emergency Telephone ........... : call 9-1-1 or local emergency number

Website ………………………..: www.RIDGID.com

Issue Date .............................. : June 13, 2013

Section 2 – Hazards Identification

EMERGENCY OVERVIEW:

This product is a liquid that is insoluble in water. Direct eye contact may cause minor,

short term irritation. Short term skin exposure is not expected to be irritating. Inhalation

and ingestion are not anticipated routes of exposure during normal conditions of use.

POTENTIAL HEALTH EFFECTS AND SYMPTOMS FROM SHORT TERM / ACUTE

EXPOSURE:

• Eye

This product is not expected to cause eye irritation under normal conditions of

use. Symptoms of slight eye irritation may result when direct contact occurs, or

when exposed to high mist levels in poorly ventilated areas.

• Skin

Short term skin contact is not expected to cause skin irritation. Prolonged or

repeated direct exposure to the skin may result in symptoms of irritation and

redness. In severe cases, prolonged or repeated contact may result in dermatitis

accompanied by symptoms of irritation, itching, dryness, cracking and/or

inflammation.

• Inhalation:

This product has low volatility and so is not expected to cause respiratory tract

irritation during normal conditions of use. Exposure to high mist levels in poorly

ventilated areas may cause upper respiratory tract irritation and difficulty

breathing.

Summary of content (11 pages)

PAGE 1
Page 1 of 11 MATERIAL SAFETY DATA SHEET Section 1 – Product & Company Identification Product Name ........................ : Product Catalog No. ............... : RIDGID Dark Thread Cutting Oil 41590, 70830, 41610, 41600 Company Name ..................... : Address .................................. : : Telephone .............................. : Emergency Telephone ........... : Website ………………………..
PAGE 2
Page 2 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil • Ingestion: Ingestion may cause slight stomach irritation and discomfort. • Potential Chronic Health Effects No further data known. • Medical Conditions Aggravated By Exposure: No further data known. • Carcinogenicity: This product is not listed as a known or suspected carcinogen by IARC, OSHA or the NTP.
PAGE 3
Page 3 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 4 – First Aid Measures EYE CONTACT: Upon direct eye contact, hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. If irritation is due to exposure to mist or vapors, remove the individual to fresh air. If irritation persists, flush the eyes with clean water until the irritation subsides. If symptoms persist, contact a physician.
PAGE 4
Page 4 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil EXTINGUISH MEDIA: In accordance with NFPA guidance, dry chemical, foam or CO2 fire extinguishers are all acceptable. Note that while water fog extinguishers are also acceptable, do NOT apply a direct stream of water onto burning product because it may cause spreading and increase fire intensity. UNUSUAL FIRE AND EXPLOSION HAZARDS: No further data known.
PAGE 5
Page 5 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 7 – Handling And Storage HANDLING: As with any industrial chemical, handle the product in a manner that minimizes exposure to practicable levels. Prior to handling, consult Section 8 of this MSDS to evaluate personal protective equipment needs. Open containers slowly to relieve any pressure. Follow all other standard industrial hygiene practices. Empty containers may contain product residue.
PAGE 6
Page 6 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil ENGINEERING CONTROLS: Normal general ventilation is expected to be adequate. It is recommended that ventilation be designed in all instances to maintain airborne concentrations at lowest practicable levels. Ventilation should, at a minimum, prevent airborne concentrations from exceeding any exposure limits. The user may wish to refer to 29 CFR 1910.
PAGE 7
Page 7 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 9 – Physical And Chemical Properties Physical Appearance:............. : Odor. ...................................... : Physical State ........................ : Water Solubility ...................... : Specific Gravity ...................... : VOC ……………………………: Black Mild Petroleum Liquid Insoluble .878 2.5% Section 10 – Stability And Reactivity STABILITY: This product is stable.
PAGE 8
Page 8 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 11 – Toxicological Information ACUTE: Oral LD50: Not determined Inhalation LC50: Not determined CHRONIC: No further toxicological data known. SENSITIZATION: No further toxicological data known. REPRODUCTIVE EFFECTS: No further toxicological data known. TERATOGENIC EFFECTS: No further toxicological data known. MUTAGENICITY: No further toxicological data known.
PAGE 9
Page 9 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 13 – Disposal Consideration WASTE DISPOSAL: Ensure that collection, transport, treatment and disposal of waste product and containers complies with all applicable laws and regulations. Note that use, mixture, processing or contamination of the product may cause the material to be classified as a hazardous waste.
PAGE 10
Page 10 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil CERCLA REPORTABLE QUANTITY: Any components listed below have been assigned a reportable quantity (RQ) by the Federal EPA. Releases of the product into the environment that exceed the RQ for a particular component must be reported to the National Response Center at 1-800-424-8802. None to report TOXIC SUBSTANCE CONTROL ACT: The components of this product are listed on the TSCA Inventory.
PAGE 11
Page 11 of 11 Product Name ........................ : RIDGID Dark Thread Cutting Oil Section 16 – Other Information Prepared by:. . . . . . . . . . . . Ridge Tool Company Issue Date: . . . . . . . . . . . . . June 13, 2013 Last Revision Date: . . . . . . .