Instructions / Assembly

INSTALLATION MANUAL

LED LIGHT DISPLAY (CHECK YOUR APP FOR SPECIFIC REAL TIME PUMP INFORMATION)

Color Symptom/Possible Cause(s) Suggested Remedies

Green 1. Good 1. Your pump is good, there is nothing needed

Yellow 1. A clogged pump inlet

2. Electrical voltage or

polarity issue detected

3. Water level in your pit is

not dropping

4. Your motor is showing

signs of aging

1. Open your sump pit and inspect the pump.

Make sure the inlet screen is free of debris and

there is nothing blocking the fow of water into

the pump.

2. Contact an electrician and have them check the

voltage and wiring of the outlet.

3. Check your pump to be sure it is properly

connected. Then check your discharge pipe for

obstructions or leaks that allow water back into

the pit.

4. Consider replacing your pump soon to stay

protected.

Red 1. There is a critical issue

with your pump

1. Replace your pump immediately.

DIGITAL CONTROLLER BUTTON

Function Action to Take

Mute Alarm Short press (at least 1 second)

System Test Hold for 5 seconds (pump health LED will flash blue) and release

Reboot Hold for 10 seconds (pump health LED will flash green) and release

Reset WiFi

Connection and

Reboot

Hold for 15 seconds (pump health LED will flash yellow), release and short

press (at least 1 second) again to confirm

Reset to Factory

Settings and

Reboot

Hold for 20 seconds (pump health LED will flash red), release and short press

(at least 1 second) again to confirm

A Button Hold Legend can be found on the back of the controller for your convenience.