Specifications

Inspection & LocatingInspection & Locating
5554
NaviTrack Transmitters
RIDGID offers a range of transmitters for different applications.
NaviTrack Transmitters generate a signal onto the buried cable one of three ways:
• Direct connection using connection cords.
• Induction with the optional inductive signal clamp.
• Induction from the transmitter.
Catalog No.
Description
Weight
Grainger RIDGID lb. kg
4GB19 14818 NaviTrack Line Transmitter 9 4.0
4GB20 20503 Inductive Signal Clamp 2 0.9
NaviTrack Line Transmitter – 10 Watt
• For tracing buried cable, TV lines, phone lines and other metallic lines which can carry
an electromagnetic signal.
• Fully variable 10 Watts of power output.
• Two 25
' coil connectors.
• Conductive ground rod.
• Inductive signal clamp (optional accessory).
Specifications
• 128 Hz, 1 kHz, 8 kHz, 33 kHz – 10 Watt output power.
• 200 kHz, 262 kHz – 1 Watt output power.
• Power Source: 8 D-Cell Batteries.
• Battery Life: Greater than 120 hours.
• Meets FCC Class B and EN 55022 Class B requirements.
Floating Transmitter
• Ideal for locating septic tanks.
• 512 Hz signal.
• Flashing LED indicates that sonde is transmitting.
• Flushable.
• Battery-powered.
•
Meets FCC Class B and EN 55022 Class B requirements.
Catalog No.
Description
Grainger RIDGID
4GB21 16728 Remote Transmitter, 512 – AAA
Remote Transmitter
• Can be attached to a drain cleaning cable or a water jet hose to locate the Remote
Transmitter in a line.
• Flashing LED indicates that sonde is transmitting.
•
Meets FCC Class B and EN 55022 Class B requirements.
Catalog No.
Description
Grainger RIDGID
2RPC3 19793 Float Sondes (2), Plus Extra Battery
NaviTrack Scout
®
Locator
The NaviTrack Scout locator is designed to solve the most demanding remote
transmitter (sonde) locates using the same multi-directional locating technology
as the full-featured NaviTrack II.
Easier Locates
The NaviTrack Scout multi-directional antenna technology sees the entire signal all
of the time. Simply maximize the signal strength and you have found the target. No
nulls or false peaks to complicate the locate.
Accuracy
This locator verifies the locate position using a micro-mapping display to mark
distinctive poles in front of and behind the target, insuring an accurate locate.
Automatic Depth
Depth is automatically calculated and displayed when over the target.
Specifications
• Weight ...................3 lbs.
• Power Source
.........4 C-Cell batteries.
• Battery Life ............
Approximately 24 hours.
Standard Frequencies
• Sonde ..............................16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
• Line Trace ........................
128 Hz, 1 kHz, 8 kHz and 33 kHz.
• Passive AC Line Trace .....60 Hz, 50 Hz.
Standard Equipment
• Hard Plastic Carrying Case.
• Surface Markers and Clip.
• Instructional DVD.
• Operator's Manual.
• 4 C-Cell Batteries.
The NaviTrack Scout is ideal for users locating SeeSnake cameras and other sondes
who occasionally need to locate energized lines.
Catalog No.
Description
Weight
Grainger RIDGID lb. kg
1VUT8 19238 NaviTrack Scout Locator 3 1.4
Meets FCC Class B and EN 55022 Class B requirements.