Specifications

K-60 Sectional Machine
For 1
1
⁄4" to 4" (32-100 mm) Drain Lines
• A compact machine for institutional, commercial or residential cleaning. Also ideal for
septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful
enough to clear tough blockages.
• Ideal for rooftop vent stacks. Rear handle allows for easy transporting up
ladders and onto rooftops.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control.
– Push handle down, cable spins at 600 RPM.
– Release handle, cable stops instantly.
• Simple adjustment knob allows unit to spin both
7
⁄8" (22 mm) and
5
⁄8" (16mm) diameter
cable. Adjusts in seconds.
–
7
⁄8" cable (C-10) cleans 2" to 4" lines through 150 feet.
–
5
⁄8" cable (C-7, C-8, C-9) cleans 1
1
⁄4" to 4" lines through 125 feet.
• Remove only two bolts to access jaw set for cleaning or replacement.
Removal of same bolts provides access to belt drive.
• Equipped with
1
⁄2 HP motor.
• Includes A-1 RIDGID drain cleaning mitt and operator’s manual.
• Approved by CSA to CSA and UL Standards (115V only).
K-60SP-SE includes:
• K-60SP Machine.
• A-1 RIDGID Drain Cleaning
Mitt.
• A-60-12 Rear Guide Hose.
• A-62 Cable Kit, includes:
– A-8 Cable Carrier.
– Five Sections Of C-10,
7
⁄8" Cable, Total 75 Feet.
• A-61 Tool Kit, includes:
– T-101 Straight Auger.
– T-102 Funnel Auger.
– T-107 Spade Cutter.
– T-125 Retrieving Auger.
– T-150-1 Sharktooth Cutter.
– A-3 Tool Box.
– A-12 Pin Key.
Model K-60SP
Catalog No.
Model No. Description
Weight
Grainger RIDGID lb. kg
1XDX9 66497 K-60SP-SE
Machine with RIDGID Drain Cleaning
Mitt, A-12 Pin Key, and A-60-12 Rear
Guide Hose, plus: A-61 Tool Kit A-62
Cable Kit
92 41.7
Cables
Cable Type
Catalog No.
Model
No.
Description lb. kg
Grainger RIDGID
7
⁄8"
Sectional
1VUX8 62275 C-10 15' All-Purpose Wind (4.6m) 9
1
⁄2 4.3
5
⁄8"
Sectional
6X908 62270 C-8 7
1
⁄2' All-Purpose Wind (2.3m) 3 1.4
K-1500 B W/C-11 shown above includes:
• K-1500 B Machine with A-1 RIDGID Drain Cleaning Mitt,
A-12 Pin Key and A-34-12 Rear Guide Hose.
• Seven Sections of 1
1
⁄4" (C-11) Cable, Total 105 Feet.
• Two A-8 Cable Carriers.
• Nine-Piece Tool Set includes:
– T-1 Straight Auger. – T-50-1 Sharktooth Cutter.
– T-3 Funnel Auger. – A-2864 Hex Key.
– T-6 Retrieving Auger. – T-8 Grease Cutter.
– A-3516 Hex Key. – A-3 Tool Box.
– T-13 Sawtooth Cutter.
K-1500 Sectional Machine For 2" to 8"
(50-200 mm) Drain and Sewer Lines
• The finest all-around sewer and drain cleaning machine. One man can easily clean the
heaviest blockages – indoors or out. High-speed cleaning gets the job done faster...better.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
– Pull handle down, cable spins at constant 710 RPM.
– Release handle, cable stops instantly.
• Wheels to the job site – sets up fast, cleans up fast.
• Low-profile “B” frame design will fit most crawl spaces, loads and unloads from truck
easily. Upright “A” frame features cable carrier storage during transport, ideal for in-
house applications.
• Equipped to run, easy to handle, 15-foot sections of 1
1
⁄4" cable to clean 3" to 8" (32m-
200mm) lines to 200 feet (61m).
• Easy clutch jaw change-out adapts K-1500 to run 15-foot sections of
7
⁄8" (4.6/22mm) cable
through 2" to 4" lines up to 175 feet (50-100mm, 53m).
• Equipped with
3
⁄4 HP motor; 115V Models.
• Includes RIDGID drain cleaning mitt and operator’s manual.
• Approved by CSA to CSA and UL Standards (115V only).
Model K-1500B
(B- Frame)
Model K-1500A
(A-Frame)
A Frame
Catalog No.
Model
No.
Description
Weight
Grainger RIDGID lb. kg
3Z748 23717 K-1500B Machine with A-1 RIDIGD Drain
Cleaning Mitt, A-12 Pin Key, and
A-34-12 Rear Guide Hose, Plus:
– Seven Sections 1
1
⁄4" (C-11)
Cable, Total 105 Feet
– Two A-8 Cable Carriers
– Nine-Piece 1
1
⁄4" Tool Set
256 116.1
B Frame
Catalog No.
Model
No.
Description
Weight
Grainger RIDGID lb. kg
1EZ18 23712 K-1500A Machine with A-1 RIDIGD Drain
Cleaning Mitt, A-12 Pin Key, and
A-34-12 Rear Guide Hose, Plus:
– Seven Sections 1
1
⁄4" (C-11)
Cable, Total 105 Feet
– Two A-8 Cable Carriers
– Nine-Piece 1
1
⁄4" Tool Set
256 116.1
Drain CleaningDrain Cleaning
Sectional Machines
7170
For cables, leaders, cable, kits, accessories and tools, see page 72.