Operator`s manual

To prevent injury, remove wrench before
turning on machine.
6. Screw nipple
(Figure 24) threaded on one end into
adapter by hand. Turn directional switch to ON and
press down on foot switch. Ream and thread other
end.
Figure 24 – Installing Nipple Chuck Adapter and Nipple
7. Insert pin on end of wrench (Figure 25) into one of
holes in nipple chuck release collar and turn.
Remove threaded nipple by hand.
To prevent injury, remove wrench before
turning on machine.
Figure 25 – Releasing Nipple from Nipple Chuck
Ridge Tool Company
20
Accessories
WARNING
Only the following RIDGID products have been
designed to function with the 300 Power Drive.
Other accessories designed for use with other
tools may become hazardous when used on this
Power Drive. To prevent serious injury, use only
the accessories listed below.
Accessories for Power Drive
Hand Tools Recommended for
Use with Power Drive
Threaders:
• 12-R Pipe Threader
• OO-R Pipe Threader
• 11-R Pipe Threader
• OO-RB Bolt Threader
Cutters:
• No. 1-A and 2-A Cutter
• No. 202 Cutter
Reamers:
• No. 2 and 3 Ratchet Reamers
Contact a RIDGID distributor or consult the Ridge cata-
log for specifications and catalog numbers.
311A Carriage and Tools as Accessories
Geared Threaders:
• No. 141 2-
1
/
2
″ – 4″ Pipe (NPT or BSPT)
• No. 161 4 – 6″ Pipe (NPT or BSPT)
300 Power Drive
WARNING
Wrench
Nipple
Adapter
WARNING
Wrench
Nipple
Model
No. Description
1206 Stand for 300 Power Drive
32 Transporter (for Power Drives and Tri-Stand Vises)
819 Nipple Chuck Complete, 1/2″ – 2″ (12mm – 50 mm)
1452 Clip-On Tool Tray
– Jaw Inserts for Coated Pipe
E-863 LH/RH Reamer Cone
– Gearhead Motor Grease
Model
No. Description
311 Carriage with No. 312 Lever
341 Reamer for No. 311 Carriage
360 Cutter for No. 311 Carriage
811A Universal Quick Opening Die Head Only, Right Hand Only
815A Self-Opening Die Head Only, Right Hand Only