Operator`s manual

Ridge Tool Company
22
When servicing the Power Drive, only identical replace-
ment parts should be used. Failure to follow these instruc-
tions may create a risk of electrical shock or other serious
injury.
If you have any questions regarding the service or
repair of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: [phone]
E-Mail: [e-mail]
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool Com-
pany at [phone] or http://www.ridgid.com
300 Power Drive
Wiring Diagram (115/230V)
Red
Yellow
Blue
Outlet
Yellow
Red
Blue
Switch
White
Suppressor
(230V Only)
Neutral White
(Blue)
3 Prong Plug
Ground (Earth)
Green (Green/Yellow)
Black (Brown)
Green (Green & Yellow)
White
Black
Black (Brown)
White (Blue)
White
White
FOR
REV
Green
Foot Switch
1. Brush and Armature Leads may be solid
colors or white with a colored stripe.
2. Wire Colors in parenthesis represent
European color code. European cord is
the same except for plug.
TRADE TOOL IS AN AUTHORIZED RIDGID REPAIR CENTER.
WWW.TRADETOOLSUPPLY.COM
503.221.8665