User Guide

K-3800 Drain Cleaning Machine
Ridge Tool Company12
Figure 16 – Position New Cable Under Bracket
NOTE! If cable will not fit under bracket, loosen the
two bolts at the drum back.
4. With cable end under bracket, retighten bolts to
clamp cable firmly against the back wall of the drum.
5. Lay drum on its back and push cable into drum.
Guide tube will evenly distribute the cable around the
drum.
6. Reassemble inner drum, front bearing and E-clips
(Figure 17).
7. Mount drum on machine as outlined previously.
Figure 17 – Reassemble Inner Drum, Front Bracket and
E-Clips
Accessories
Only the following RIDGID products have
been designed to function with the K-3800 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-3800.
To prevent serious injury, use only the accessories listed
below.
Catalog Model
No. No. Description
37842 C-31 50′ (15m) I.C. Cable
37847 C-32 75′ (23m) I.C. Cable
37852 C-33 100′ (30m) I.C. Cable
Catalog Model
No. No. Description
37857 C-44 50′ (15m) I.C. Cable
37862 C-45 75′ (23m) I.C. Cable
55467 C-46 90′ (27m) I.C. Cable
3/8″ Cables (10mm)
1/2″ Cable (12mm)
Catalog Model
No. No. Description
56782 C-1IC
5
/
16
″ x 25′ (7.6m) Inner Core
w/Bulb Auger
56787 C-2IC
5
/
16
″ x 25′ (7.6m) Inner Core
w/Drop Head Auger
56792 C-13IC
5
/
16
″ x 35′ (10.7m) w/Funnel Auger
50652 S-2
1
/
4
″ x 25′ (7.6m) w/Funnel Auger
50657 S-3
1
/
4
″ x 35′ (10.7m) w/Funnel Auger
Sink Drum Cables
WARNING
Catalog Model
No. No. Description
55002 A-380 Std Drum for
3
/
8
″,
1
/
2
″ Cable
55007 A-381 Sink Drum for
5
/
16
″,
1
/
4
″ Cable
41937 — Pair of Gloves
59230 A-13 Pin Key for
3
/
8
″ Cable
59225 A-12 Pin Key for
1
/
2
″ Cable
55017 — Transport Cart
55012 A-381-A Sink Drum w/25′ x
5
/
16
″ Inner
Core Cable
60087 — K3800 Power Feed
Accessories