Install Instructions

K-1500G Drain Cleaning Machine
Ridge Tool Company4
Machine Assembly
WARNING
To prevent serious injury, proper assembly of the
K-1500G Drain Cleaning Machine is required. The
following procedures should be followed:
Instructions for Installing Handle
1. Insert handle assembly into handle opening in base
and attach by means of four
3
/
8
w bolts provided
(Figure 1).
Catalog Model
No. No. Description
62840 T-1 Straight Auger
61800 T-2 Heavy-Duty Straight Auger
63105 T-3 Funnel Auger
61790 T-4 Heavy-Duty Funnel Auger
63190 T-5 Straight Retrieving Auger
63195 T-6 Funnel Retrieving Auger
63200 T-7 Hook Auger
63205 T-8 Grease Cutter, 2
1
/
2
w
63210 T-9 Grease Cutter, 3
1
/
2
w
62845 T-10 Grease Cutter, 4
1
/
2
w
59480 T-11 “H” Cutter, 2
1
/
2
w
59485 T-12 “H” Cutter, 3
1
/
2
w
61970 T-13 Sawtooth Cutter, 2
1
/
2
w
61975 T-14 Sawtooth Cutter, 3
1
/
2
w
61770 T-15A Expanding Cutter, 4w- 6w
61825 T-15B Expanding Cutter, 6w- 8w
61960 T-16 Spiral Bar Cutter, 4w
61850 T-17 Spiral Bar Cutter, 6w
61855 T-18 Spiral Bar Cutter, 8w
59625 T-21 Spiral Sawtooth Cutter, 2
1
/
2
w
63075 T-22 Spiral Sawtooth Cutter, 3w
63085 T-23 Spiral Sawtooth Cutter, 4w
59765 T-24 4-Blade Cutter, 2
1
/
2
w
59770 T-25 4-Blade Cutter, 3
1
/
2
w
59775 T-26 4-Blade Cutter, 4
1
/
2
w
59780 T-26A 4-Blade Cutter, 5
1
/
2
w
98030 T-50 Three Blade, 3w<4w< 5w
98035 T-50-1 Sharktooth Cutter, 3w
98040 T-50-2 Sharktooth Cutter, 4w
98045 T-50-3 Sharktooth Cutter, 6w
63110 T-31 Chain Knocker, 3w<4wPipe
63115 T-32 Chain Knocker, 6wPipe
63120 T-33 Chain Knocker, 8wPipe
63145 T-38 Flue Brush, 1
1
/
2
w
63150 T-39 Flue Brush, 2w
63155 T-40 Flue Brush, 2
1
/
2
w
63160 T-41 Flue Brush, 3w
63165 T-42 Flue Brush, 3
1
/
2
w
63170 T-43 Flue Brush, 4w
63175 T-44 Flue Brush, 4
1
/
2
w
63240 T-45 Flue Brush, 5w
63180 T-46 Flue Brush, 5
1
/
2
w
63185 T-47 Flue Brush, 6w
Tools for C-11, C-12, C-14 and C-15 Cables 1
1
/
4
w
NOTE! See Ridge Tool Catalog for complete listing of
tools and accessories.
Catalog Model
No. No. Description
92280 C-11 15vStandard All-Purpose Wind,
3
/
8
wPitch.
Good for 4wTraps, 3w- 8wLines.
62285 C-12 15vExtra-Heavy-Duty Wind,
3
/
8
wPitch.
4w- 10wLong Runs, No 4wTraps.
62295 C-14 15vHeavy-Duty Wind,
1
/
2
wPitch. 3w- 10wLines
Through Cleanout, No 4wTraps.
62300 C-15 15vExtra-Flexible Wind,
1
/
2
wPitch. 3w- 6wLines
Good for Traps.
63090 T-27 1
1
/
4
wx 25vLeader
62275 C-10 15vStandard All-Purpose Wind,
Requires A-368X Jaws and
7
/
8
wTools
Cables and Leaders
Standard Equipment
Machine Options
Catalog Model
No. No. Description
44587 K-1500G Machine Only with A-1 Glove, A-12
Coupling Pin Key and A-34-10 Rear
Guide Hose
48462 K-1500G Machine with Standard Equipment,
w/C-14 includes:
– Ten Sections Of C-14 Cable,
Total 150 Feet
– Three A-8 Cable Carriers
– A-1 Left-Hand Mitt
– A-12 Coupling Pin Key
– A-34-12 Rear Guide Hose
– A-2864 Hex Key
– A-3516 Hex Key
– A-3 Tool Box
– T-2 Heavy-Duty Straight Auger
– T-4 Heavy-Duty Funnel Auger
– T-6 Retrieving Auger
– T-8 Grease Cutter
– T-13 Sawtooth Cutter
– T-50 Sharktooth Cutter
NOTE! C-10 (
7
/
8
wDia.) cable should be used to clean 2wdiameter
drains. Requires A-368X jawset and
7
/
8
wtools.