Operator`s manual

5 – English
See Figure 3, page 13.
The following items are included with your miter saw
workstand:
 Workstand Assembly
 Quick Release Saw Mounting Brackets (2)
 Work Supports (2)
 Work Support Brackets (2)
 Adjustment Knobs (4)
 End Caps (2)
 Wheels (2)
 Hex Bolts, M10 (2)
 Washers, 24 x 13 x 2 (2)
 Washers, 20 x 10.5 x 1.5 (2)
 Lock Nuts, M10 (2)
LOOSE PARTS
WARNING:
The use of attachments or accessories not listed in this manual might be hazardous and could cause serious
personal injury.
 Leg Supports (2)
 Hex Bolts, M6 x 48 (4)
 Spring Washers, 16 x 6.5 x 1.5 (8)
 Lock Nuts, M6 (4)
 Transport Handle
 Screws, M6 x 38 (3)
 Spring Washers, 16 x 6.5 x 1.5 (3)
 Lock Nuts, M6 (3)
 Hex Bolts, M6 (2)
 Flat Washers, 16 x 6.5 x 1.5 (2)
 Plastic Washers, 19 x 6.8 x 2 (2)
 Lock Nuts, M6 x 55 (2)
 Blister Packs - Saw Mounting Hardware
(Not Shown) (2)
 Operator’s Manual (Not Shown)
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Loose
Parts List are already assembled to your product
when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result
in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
ASSEMBLY