OPERATOR’S MANUAL 24 VOLT LITHIUM-ION BATTERY CHARGER 140315001 (R85009) BATTERIES SOLD SEPARATELY NEW BATTERY PACKS MUST BE CHARGED BEFORE FIRST USE Your charger has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
IMPORTANT SAFETY INSTRUCTIONS WARNING! Keep cord and charger from heat to prevent damage to housing or internal parts. READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Do not let gasoline, oils, petroleum-based products, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL DESIGNATION/EXPLANATION NAME Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product.
OPERATION APPLICATIONS CHARGE LEVEL INDICATOR You may use this tool for the following purpose: �Charging 24 Volt RIDGID lithium-ion batteries 24vXLi CAUTION: ? If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Return the charger and battery to your nearest service center for service or replacement. CAUTION: Charge in a well ventilated area. Do not block charger vents.
OPERATION LED FUNCTION OF CHARGER See Figure 3. LED INDICATOR Charging BATTERY PACK Fast charging RED LED ON GREEN LED ACTION OFF Charges in 1 hour Charging Deeply Discharged ON OFF Charger pre-charges battery until normal voltage is reached, then begins fast charge mode.
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc.
WARRANTY RIDGID® HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY WHAT IS NOT COVERED Proof of purchase must be presented when requesting warranty service. This warranty applies only to the original purchaser at retail and may not be transferred.
OPERATOR’S MANUAL 24 VOLT LITHIUM-ION BATTERY CHARGER 140315001 (R85009) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the bottom of the charger.