TP1300 OWNER’S MANUAL 13 INCH THICKNESS PLANER For Your Safety: Read all instructions carefully Save this manual for future reference Part No.
Repair Parts Parts List for 13" Thickness Planer Model No. TP13001 RIDGID parts are available on-line at www.ridgidparts.com Figure 1 1 23 2 4 22 3 11 21 20 8 7 19 6 5 15 15 13 16 12 11 10 17 9 14 18 Always order by Part Number - Not by Key Number Key No. Part No. 1 2 3 4 5 6 7 8 9 827808 820240-7 827689 827740 827890 827809 827811 827810 821065-3 10 11 12 826463-4 820383-4 827812 Key No. Description Cord w/plug * Screw Pan Hd M5 x 0.
2 Repair Parts 1 3 85 4 13 7 84 5 14 24 8 16 17 25 18 19 12 81 20 26 27 6 28 79 78 76 22 83 29 20 37 32 23 18 33 39 77 74 56 75 68 36 38 69 70 87 27 31 30 41 42 43 45 35 46 44 62 64 63 67 72 86 65 47 48 61 60 59 34 40 71 66 73 58 49 27 49 57 50 10 51 56 88 Figure 2 36 52 53 55 54 Parts List for 13" Thickness Planer Model No. TP13001 80 21 26 RIDGID parts are available on-line at www.ridgidparts.
Repair Parts Parts List for 13" Thickness Planer Model No. TP13001 RIDGID parts are available on-line at www.ridgidparts.com Figure 2 Always order by Part Number - Not by Key Number Key No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Part No.
Repair Parts 2 1 3 2 1 4 5 4 7 2 57 6 56 8 6 53 58 12 8 5 13 51 See Figure 1 9 14 10 29 17 15 19 16 18 20 22 21 22 59 25 23 40 29 49 10 26 41 48 35 41 27 36 29 28 42 40 46 47 24 39 32 44 43 33 34 45 31 30 39 38 37 51 29 28 Figure 3 50 Parts List for 13" Thickness Planer Model No. TP13001 52 5 9 10 11 RIDGID parts are available on-line at www.ridgidparts.
RIDGID parts are available on-line at www.ridgidparts.com Figure 3 Always order by Part Number - Not by Key Number Key No 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Part No.
Wiring Diagram Switch Black Motor Lead Over Load White Power Cord Motor Lead Green Motor Grounding Wire Troubleshooting Problem Possible Cause Remedy 4. Extensions misaligned 1. Replace knives per instructions (See “Replacing Knives” section) 2. Support long boards 3. Butt end to end each piece of stock as boards pass through planer 4. Adjust extension supports Fuzzy Grain 1. Planing wood with a high moisture content 1. Remove high moisture content from wood by drying Torn Grain 1.