Replacement Part List

- OR -
2. The Wet/Dry Vac may also be used for
blowing using the seven-foot hose
supplied with the Wet/Dry Vac. Install
the push button end of the Vac hose in
the blowing port of the detachable
blower. For added control, an
extension wand and/or car nozzle can
be added to the opposite end of the
hose. The unit is ready for blowing
applications.
13
Operation (continued)
Using the Detachable Blower
for “Blowing”
Two suggested methods of using the
blower are:
1. Insert the round end of the blower wand
into the blowing port of the detachable
blower and turn clockwise to lock.
Male-Male
Adapter
Car Nozzle
Goggles
Dusk Mask
Blowing
Port
Blower
Wand
TURN CLOCKWISE
TO LOCK
3. Turn the blower “ON” by sliding the
switch in the handle of the blower to
the “I” position.
SP6779-1 Ridgid WD1680 12/21/10 4:07 PM Page 13