User manual

54
SYSTEM DESCRIPTION
LCD INDICATORS
This chapter provides a detailed description of all the display indicators.
ICON STATE DESCRIPTION
Steady on Indicates a fault (see table 3)
Flashing The UPS is in stand-by mode
Steady on The UPS is operating in mains mode
Steady on
The UPS is operating in battery mode. In this state it will beep at
regular 4-second intervals.
Flashing
When operating in battery mode, the UPS signals that it is about
to switch off due to end of discharge. In this state it beeps at
regular 1-second intervals.
Steady on Indicates that the battery is faulty
Steady on The AVR function is active
Steady on The Powershare socket is active
Active
Represents the estimated percentage of battery charge
(see table 1)
Active
Indicates the percentage of load applied to the UPS in relation
to the nominal value
(see table 2)
Flashing The UPS is in an overload condition