User manual

58
SYSTEM DESCRIPTION
ACOUSTIC SIGNALS
DESCRIPTION BEEP BUZZER STATUS
a) Fault (e.g. due to overheating or fan failure) Continuous
t
1
23456
0
1
78910
b) Battery overcharged Continuous
t
1
23456
0
1
78910
c) Overload
Intermittent
(1s on/1s off)
t
1
23456
0
1
78910
d) UPS in battery mode
Intermittent
(1s on/4s off)
t
1
23456
0
1
78910
e) UPS in battery mode with battery flat
Intermittent
(1s on/1s off)
t
1
23456
0
1
78910
f) Battery disconnected after the battery test
Intermittent
(1s on/1s off)
t
1
23456
0
1
7891
0
g) The UPS is performing the battery test
Intermittent for 3
times
(0.5s on/0.5s off)
t
1
23456
0
1
78910
h) If none of the events in the previous points
has occurred
Not active
t
1
23456
0
1
78910
In battery mode the acoustic signal can be silenced by holding the “ON” key down for 3 seconds.
This will only remain inhibited if none of the events in points b), e) and f) has occurred.
BATTERY TEST
In mains mode, hold the “ON” key down for more than 5 seconds (a beep will sound) to run a battery test lasting
5 seconds (default time). During the battery test, the “Line” and “Battery function” icons will both light up.
The battery test process