Installation Guide

Fig 18

7-Tighten all (4) straps. The top of the bag should follow

a straight line parallel to the top of the rear seat (Fig

18).

Wrangler JK (4-door)

1-Position the bag behind the rear seat. The top of the

bag should follow a straight line parallel to the top of the

rear seat (Fig 12).

2-Buckle (2) of the rear side straps through their matching

attachment rings on the bottom of the rear seat (Fig 13).

Fig 12

3-Buckle the A strap over the rear horizontal roll bar, with-

out twisting the strap (Fig 12 and Fig 14).

Fig 14

Fig 15

4-Buckle the D strap over the rear horizontal roll bar, with-

out twisting the strap (Fig 12 and 15).

5-Buckle the B strap around the left headrest, without

twisting the strap (Fig 12 and Fig 16).

6-Buckle the C strap around the right headrest, without

twisting the strap (Fig 12 and Fig 17).

Fig 16 Fig 17

B C

1 Year Manufacturer’s Limited Warranty

www.rightlinegear.com/product-warranty.html

Attachment

Ring

Rear Side

Strap

Rear Side

Of Bag

Fig 13