Application Guide

Rightline Gear Truck Tent Positioning Tips
Here are a few tips to help with the setup of your Rightline Gear Truck Tent.
Tip #1 – The front corners of the tent have split seams that go over the front corners of the bed.
Make sure that the front corners of the tent stay in the position shown below during set up.
Tip #2 – As you follow the Truck Tent Set Up Guide, make sure that you keep the inner flap
seam even with the top of your truck bed as shown below. There are two seams along each side;
the inner flap seam is the lower of the two. Customers sometimes over tighten the straps on the
outside of the bed, causing the inner flap seam to be pulled down below the top of the bed. Over
tightening these straps will not allow the truck tent to fit properly. If the outside straps at the
front corner of the tent are extremely over-tightened, the front corner of the tent can also be
damaged.