Application Guide

Depending on the model truck, the inner side flap seam will rest an inch or two inside the top
outer edge of the truck bed as shown in the photo below. This positioning is not a problem. If
your tent sets up with the inner side flap seam as shown, do not over-tighten the straps in an
effort to get it to come to the top outer edge of the truck bed.
Tip #3 – The dark gray fabric on the sides of the tent does not extend all the way to the back end
of the truck bed. The end of the truck bed and most of the taillights will be covered by the lighter
gray fabric as shown below. If you try to match up the end of the dark gray fabric with the end of
the truck bed, you will not be able to keep the front corner of the tent as shown in Tip #1.
We hope these tips will help you during set up. Please feel free to call us with any additional
questions you may have.