User manual

Chapter 1 Quick Start RIGOL
DP800A User’s Guide 1-15
User Interface
DP800A series power supply provides three kinds of display modes (normal,
waveform and dial). The default is normal and press Display  Disp Mode to set
the display mode to “Waveform” or “Dial”. This section introduces the interface
layout under the normal display mode (as shown in
Figure 1-8 and Table 1-2).
Figure 1-5 DP831A User Interface
Tip
When the current display mode is “Normal” or “Waveform”, press at the
front panel to switch between the current display mode and dial display mode.
1
2
3
4
5
6
7
8 9 10 11