User manual

Chapter 2 Front Panel Operations RIGOL
DP800A User’s Guide 2-37
the “Pinyin Input Area” (at this point, you can press 0 in the numeric
keyboard to directly input this English character). After inputting the pinyin
of a Chinese character, select the number of the desired Chinese character
using the numeric keyboard in the “Chinese Character Selection Area” (if
the desired Chinese character is not displayed currently, use the direction
keys to turn to the previous or next page) and the Chinese character
selected is displayed in the “Filename Input Area”. Use the same method to
input all the Chinese characters in the filename. You can press Delete to
first delete the character in the “Pinyin Input Area” and then delete the
Chinese character currently at the left of the cursor in the “Filename Input
Area”.
Figure 2-11 Filename Input Interface (Chinese)
4. After inputting the filename in the filename input interface, press OK and the
instrument stores the file with the specified filename in the specified file type
under the directory currently selected. If the storage location selected already
contains file, the instrument will prompt whether to overwrite the original file
and press OK or Cancel to finish or give up the save operation.
Pinyin Input Area Virtual Keyboard
Filename Input Area Chinese Character Selection Area