User manual

RIGOL Chapter 2 Front Panel Operations
2-38 DP800A User’s Guide
Read
1. Press Store  Type to select the desired file type.
Note: The read operation is available only when the file type is “*.rsf” or “All File”.
The “*.rtf” and the “*.rdf” files can be read separately by pressing Timer 
Timer Set  Read and Timer  Delay Set  Read and the “*.rof” file can
be read by pressing  Analyzer  Open File.
2. Press Browser to switch the cursor to the directory area and select the
directory of the file to be read; press Browser again to switch to the file area
and select the file to be read.
3. Press Read, the instrument read the file currently selected. If the current
location does not contain a valid file, the corresponding prompt message will be
displayed. For state file, the instrument returns to the main interface after the
file is successfully read; for other types of files, the instrument returns to the
corresponding function interface after the file is successfully read.
Delete
Delete the files under C disk and D disk as well as the empty folders under D disk.
1. Press Browser to move the cursor to the directory area and select the directory
of the file to be deleted; press Browser again to switch to the file area or the
empty folder area and select the file or empty folder to be deleted.
2. Press Delete and the instrument deletes the file or empty folder currently
selected.
Copy
You can only copy the files in C disk to D disk.
1. Press Browser to move the cursor to the directory area and select C disk; press
Browser again to switch to the file area and select the file to be copied.
2. Press Copy and the instrument copies the file currently selected.