User manual

RIGOL Chapter 2 Front Panel Operations
2-54 DP800A User’s Guide
Recall the user-defined setting
In the interface as shown in Figure 2-19, press Preset Key to select and set the 4
groups of user-defined settings. At this point, pressing Preset at the front panel will
recall the specified setting.
Press Preset Key to enter the interface as shown in Figure 2-20 (user-defined
setting 1 is selected in the interface). The instrument setting is displayed in the
interface. At this point, pressing Preset at the front panel will recall the
corresponding setting.
Figure 2-15 User-defined Setting Interface
You can modify the parameters of the user-defined setting currently selected.
 Press the channel selection key at the front panel to select the desired channel.
 Press the menu key to modify the voltage, current, OVP, OCP, track and OTP
parameters.
 You can restore the user-defined parameters modified to default values by
pressing Default in the last menu page in the interface as shown in Figure 2-20.
You can also rename the 4 groups of user-defined settings (the default names are
user1 to user4) and the name is displayed at the upper-right corner of the interface
as shown in Figure 2-20. Press Preset Key and use the direction keys and knob to
edit the name.