• r\n~ V id e o D o o r b e ll Pro W e d g e Kit \nsta\\ G u id e
Install Tips Mount your Ring Pro flat against angled siding) or if your door is near a staircase) mount your Ring Pro at an angle for a better view and improved motion detection. 1. Comes with 3 stackable wedges 2. Ranges from 5°, 1ooand 15° angles 3. Make sure to trim the feet off the back of the wedge that mounts directly to the wall. Ring Installation Kits are paintable to match your home. Check out ring.com/install-kits for more information For additional help, visit: ring.
1. Use the provided screws to mount one or more Wedge mounts to your wall. If installing one Wedge mount} use the shorter (1.25in or 38mm) screw. If installing more than one Wedge mount} use the longer (2.0in or 51 mm) screw. ~: D . ., J-H1rtJ."H-tf!,t>HtJ>. ::• ' ' I \==t1 .. ...... .. .. o o : .. .... .... .. ... .. ..
2. If necessary, reconnect your Doorbell Pro to your doorbell wiring. 3. Use the shortest screws to mount the doorbell to the Wedge mount(s). 4. Put the faceplate back on your Doorbell Pro.
