Manualshelf

Venting Installation Instructions

ManualsBrandsRinnai ManualsPlumbing39 in. Plastic Vent Pipe Extension for High Efficiency and High Efficiency Plus Tankless Water Heaters
6789101112131415
First place innerwall plate to
slide terminal through
NOTE
3
After cutting the appropriate length, slide the Horizontal Termination through
the hole in the wall. Position the first rubber wall plate around the male end
of the termination.
Case A; Slide the male end of the termination in the Horizontal Discharge Adapter.
Case B: Slide the male end of the termination into the 90° Vent Pipe Elbow.
Fill the gaps between the wall and the vent pipe penetration with a weather proof
Sealant. Finally, position the second rubber wall plate around the vent pipe, between
The end of the termination and the exterior wall.
Final installation of the vent system
Condensate can damage the water heater, please read carefully
page 4 in this installation manual
11
NOTE
CASE A:
Installation with Male Appliance Top
Case B:
Installation With Female Appliance Top