Service manual

34
Maintenance
Fan Removal
1. Undo Spring clip `B` and push rubber boot back off fan housing
2. Disconnect wiring plug from fan motor (see Drawing G connection 3)
3. Undo 2 screws `1`
4. Fan assembly will now drop
5. Carefully pull forward
6. Find air thermistor `C` follow the white cables and disconnect at it plug and socket (see
drawing G connection 4)
7. Visually inspect impellor, if heavily soiled either remove plate`D` by removing screws `2`
or remove motor fully
8. Once completed cleaning reverse the above procedure
DRAWING D