Installation guide
Rinnai Continuous Flow Water Heating Specication Guide 02-13 | 21
Controllers
A maximum of four water controllers can be fitted, and any combination of the deluxe, compact, and wireless
controllers can be used with the following limitations:
- Only ONE master controller can be installed, this can be a Kitchen Deluxe, Compact, or Wireless Controller
- Up to TWO Bathroom Deluxe controllers can be installed
- The fourth controller in any installation must be a Compact or Wireless Controller
Each remote controller can be individually programmed, however the water heater can only deliver one set
temperature at any time. For example, John is in the shower and has set the controller to 42 °C, Jane uses the
kitchen tap at the same timethe water temperature coming out of the kitchen tap will also be 42 °C (or lower if
using a mixer and adding cold water). Jane can only change the programmed temperature once John is out of the
shower.
All wired controllers come with 15 m of cable.
If ordering a wireless controller you will need to order the controller, and the transceiver. Up to four Wireless
Controllers can be attached to one Wireless Transceiver.
Recess boxes
Designed for new build installations or major renovations as installation needs to commence during the framing
stage, before internal linings, claddings or building wrap is applied.
The Metal Recess Box can be fully or semi recessed into an external wall while the Composite Recess Box can only
be partially recessed.
Flue diverters
Flue diverters are suitable for externally mounted (single water heater applications only) Rinnai Infinity continuous
flow water heaters NOT installed in a recess box.
Security bracket
Ideal for all Rinnai continuous flow gas water heaters—can be retrofitted to existing installations, and can be easily
installed by the homeowner, gasfitter, or builder.
Rinnai Innity VT service & maintenance
For reliable operation Rinnai continuous flow water heaters in domestic applications should be
serviced every two years.