Installation guide
Rinnai Continuous Flow Water Heating Specication Guide 02-13 | 23
Rinnai Innity HD dimensions (mm)
B
D
C
M
A
E
F
J
L
H
G
I
K
O
N
P
HD200 external
VRM2632WC
HDi200 internal
VR2632FFUC
HD250 external
VR3237WG
A Width 350 350 470
B Depth 250 235~275 244
C Height - unit 600 600 600
D Height - including brackets 636 641 644
E Hot water outlet (from wall) 95 91~131 115
F Hot water outlet (from centre) 110 110 61
G Cold water inlet (from wall) 74 70~110 99
H Cold water inlet (from centre) 27* 27* 52
I Gas connection (from wall) 103 99~139 61
J Gas connection (from centre) 89 89 110
K Condensate outlet (from wall) N/A N/A N/A
L Condensate outlet (from centre) N/A N/A N/A
M Gas: Length gas connection (from base) 41 41 41
Cold: Length of cold water inlet (from base) 51 51 51
Hot: Length of hot water outlet (from base) 42 42 42
N Electrical connection (from centre) 21** 21** 2**
O Electrical connection (from wall) 160 160~200 100
P Flue spigot centre line (from wall) N/A 95~135 N/A
* This measurement is to the left of the centre line
** This measurement is to the right of the centre line
HDi200: Height of flue spigot from base of unit is approximately 85 mm