Installation guide
Rinnai Continuous Flow Water Heating Specication Guide 02-13 | 39
Rinnai Innity metal recess box
Specification summary
Codes
R1405
R1407
Refer 'Suitable for' to determine what
recess box you need.
Description
The Rinnai Metal Recess Box (white)
enables an external continuous flow
gas water heater to be recessed
(either fully or semi recessed) into an
external wall, behind a door and out
of sight.
Construction is folded galvanised
steel, powder coated white. The
recess box is supplied in white and
can be easily customised to match
the house exterior by the owner or
installer.
Suitable for
R1405
For installations with Rinnai Infinity
external VT16, VT20, VT24, and VT26
units.
R1407
For installations with Rinnai Infinity
external HD200, HD250 and EF24
units.
New construction or major
renovation—installation needs to
commence during the framing stage
before internal lining, claddings, or
building wrap is applied.
Building code compliance
Territorial authorities may have
their own additional requirements
regarding this type of installation.
If in doubt over compliance with
building codes, it is advisable they are
consulted prior to installation.
Positioning
An Infinity unit inside a recess
box operates at a slightly louder
level than an Infinity installed on
an outside wall. Please bear this in
mind when locating the recess box
and Infinity near a bedroom as the
operating noise could affect some
people.
944 mm
205 mm (R1405)
270 mm (R1407)
417 mm (R1405)
514 mm (R1407)