Installation guide

Rinnai Continuous Flow Water Heating Specication Guide 02-13 | 41
Rinnai Innity security bracket
Security
bracket
Water heater
bracket
Security
bracket
Wall
Specification summary
Code
ACC1395
Description
A sturdy security bracket can be
installed to act as a permanent
deterrent to thieves. Consisting of
two U-shaped 2 mm powder coated
galvanised steel plates which easily
interlock through the lower bracket,
this system can be easily secured with
a robust padlock (not included).
How it works
The bracket prevents access to the
bolts fixing the unit to the wall, this
locks the lower Rinnai continuous
flow water heater in place, and
prevents the unit from being quickly
removed from the wall. The bracket
fits on all Rinnai units.
Additional features
- Small and unobtrusive—no cage
or strap over unit which can look
unsightly
- Can be painted
- Will not damage wall cladding
or unit
- Holes in sides of bracket enable
pop-rivets to be fitted, providing
extra protection
Suitability
For all Rinnai continuous flow gas
water heaters—can be retrofitted to
existing installations.
Can be installed on all cladding
systems like weatherboard, brick and
plaster. Can also be installed inside a
recess box.
Ideal for
Builders installing gas units on new
homes that need to protect the
Rinnai continuous flow gas water
heater before the home is sold or
handed over to the new owners.
Installation
Can be easily installed in
approximately 10 minutes by the
homeowner, gasfitter or builder.
Dimensions
Height: 70 mm
Width: 190 mm
Depth: 33.5 mm