Installation guide

Rinnai Continuous Flow Water Heating Specication Guide 02-13 | 45
Rinnai Innity EZ connect cable
Specification summary
Code
REUEZC
Description
The installation of a Rinnai EZ
Connect Cable allows a maximum
of two Rinnai Infinity water heaters
(specific models only) to be
connected together so they function
as one large unit.
The two water heaters can be
installed 5-460 mm apart. The
maximum distance of 460 mm is so
the cable will reach between the two
units, and to prevent temperature
fluctuations when the water is turned
off and on.
Installation
Installation by a certified
tradesperson is required.
Suitability
Can be used with the following water
heaters:
- HD200 external
- HDi200 internal
- HD250 external
- EFi250 internal
- EF250 external
Bathfill function
The bathfill function on the Bathroom
Deluxe Controller will not work if an
EZ Connect Cable has been fitted.