Installation manual
Rinnai New Zealand Ltd. Continuous Flow Water Heater Installation Manual:
03-11
3
Before installation
Unpack appliance and ue components (if applicable) and check for damage.
DO NOT install any damaged items.
Check all components have been supplied and that you have the correct gas type.
Read these instructions to get an overview of the steps required before starting the
installation. Failure to follow these instructions could cause a malfunction of the
appliance. This could result in serious injury and property damage.
For Rinnai continuous ow water heaters used in solar installations, refer
‘Recommended Solar System Layout’.
The Rinnai Innity EF models are 32 kg. Please use care when lifting and seek
assistance if required.
This appliance must be installed in accordance with:
• Current AS/NZS3000, AS/NZS3500, NZS 5261 and G12/AS1
• Rinnai installation instructions
• Local regulations and municipal building codes
Installation, service and removal must be by an authorised person only.
32 kg
Heavy
These installation instructions apply to the following Rinnai continuous ow water heaters.
Rinnai Innity VT16 External REU-VR1620WG
Rinnai Innity VT20 External REU-VR2024WG
Rinnai Innity VT24 External REU-VR2426WG
Rinnai Innity VT26 External REU-VR2626WG
Rinnai Innity VTa26 External REU-VR2626WGT
Rinnai Innity HD200 External REU-VRM2632WC
Rinnai Innity HDi200 Internal REU-VR2632FFUG
Rinnai Innity HD250 External REU-VR3237WG
Rinnai Innity EF24 External REU-K2430WG
Rinnai Innity EF250 External REU-KM3237WD
Rinnai Innity EFi250 Internal REU-KM3237FFUD
i = internal
a = aggressive water unit
Applicable models