Instructions / Assembly

10 Outdoor Conversion Manual
Exhaust adapter ring
Outdoor vent cap
Front door of
outdoor vent cap
4. Remove and discard exhaust adapter ring (Figure 9).
5. Inspect gaskets prior to installing outdoor vent cap as shown in Figure 10. Make sure exhaust
outlet faces the front of the water heater and the outdoor vent cap is fully inserted.
6. Open front door of outdoor vent cap. Using a Phillips head screwdriver (field-supplied), secure
outdoor vent cap to water heater with two screws supplied in kit (Figure 11).
7. Close front door of outdoor vent cap (Figure 12).
Exhaust outlet
Screw
Screw
Figure 12
Figure 11
Figure 10
Figure 9
Gaskets