Instructions / Assembly

Outdoor Conversion Manual 11
Note: To utilize BLE, your connecting device
(smartphone, tablet, computer, etc.) must have
Bluetooth 4.0 or a newer version. Contact your
connecting device manufacturer if you are not
sure if your connecting device has Bluetooth 4.0
or a newer version.
1. Download the Rinnai
Central app by scanning
the following QR code:
SEt
2. Supply power to the tankless water heater
for the first time. The controller displays
“SEt” and the “Priority” button LED light on
the controller is blinking.
3. Download and install the Rinnai Central™
app.
4. Open the Rinnai Central™ app from your
smart device. Create an account and log in.
5. Push the Bluetooth button on the controller.
The Bluetooth LED light turns solid.
6. Tap “Connect to a Rinnai Tankless Water
Heater” on the Rinnai Central™ app.
You will hear a beeping sound when
pairing between the app and water heater
is established.
SEt
• Confirm that the inlet gas pressure is
between the minimum and maximum
pressures allowed for this appliance.
• Refer to the “Tankless Water Heater
Installation and Operation Manual” for
additional parameter settings, such as
recirculation settings, gas type, pump speed,
etc. (the manual is supplied with the tankless
unit or located online at www.rinnai.us).
IMPORTANT
Adjust the tankless water heater parameter
settings by choosing one of the two options
below:
•
Option 1 (Recommended): Adjust
parameter settings using a Bluetooth®-
capable Smart Device
•
Option 2: Adjust parameter settings from the
tankless water heater integrated controller.
If proper settings are not selected before you
use the tankless water heater, it will cause a
hazardous situation which results in personal
injury or property damage.
WARNING
LED light
“Priority”
button
LED light
“Bluetooth”
button
This tankless water heater is set up for natural
gas and indoor installations as default. When
power is connected for the first time, you need to
choose the correct gas type and outdoor setting.
Sample Screen