Instructions / Assembly

Outdoor Conversion Manual 13
6. The controller displays “nG” or “LPG,” and
“In” or “Out” alternatively while the
“Priority” button LED light is flashing. The
controller is showing the current gas
setting and indoor/outdoor setting.
For example, the controller displays “nG”
and “Out” alternatively, indicating the
water heater is set for natural gas and
outdoor installation.
7. If settings are correct: Press the
“Priority” button.
If settings are not correct:
Press the up arrow button to return to step
1. Repeat the steps starting at step 1.
8. The controller briefly displays “888” and
makes a beeping sound. Then, complete
initial settings and the controller is off.
888
9. When settings are complete, the controller
display will appear blank.
Press the “On/Off” button to turn on the unit.
LED light
“Priority”
button
Up arrow
button
“On/Off”
button
4. The controller displays “In” (indoor
installation).
3(B). If using propane gas: Press the up or
down arrow button. The controller
displays “LPG” (Liquid Propane Gas).
Press the “On/Off” button to confirm
propane gas. Then, proceed to step 4.
LPG
Out
5. Press the up or down arrow buttons. The
controller displays “Out” (outdoor installation).
Press the “On/Off” button to confirm
“Out” (outdoor installation).
“On/Off”
button
Up and down
arrow buttons
Up and down
arrow buttons
“On/Off”
button
In