Quick Start Manual

PG 9

PG 10

Install AAA Batteries

• The 6030 requires 2 AAA batteries to operate .

• Switch MODE switch to OFF and the FAN switch to AUTO.

• Install 2 AAA alkaline batteries according to the polarity noted in

the compartment. LCD segments will go on.

• Press the RESET button (under top cover) to clear transient

program memory. NOTE: Replace the batteries when this LOW

battery indicator appears on the display or once a year.

• Replace top and bottom covers on unit.

Wall

Wires

6030

Wall anchor

• Hold the 6030 against the wall, with the wires coming over

the top above terminal block. The 6030 will cover the hole

in the wall.

• Position 6030 for best appearance. Use the optional stand-

offs if more space for wires is needed behind the 6030.

• Attach the base to the wall with the screws provided.

• If you are mounting the base to sheet rock or if you are

using the old mounting holes, use the plastic anchors

provided. Drill a 3/16-in.(4.8mm) hole for

the insert at each screw location, then

mount the base.

Mount the 6030

PROG

HEA

COOL

OFF

FAN

AUT

PROG

HEA

COOL

OFF

FAN

AUT

AAA