Instructions / Assembly

MODEL NO.: QCF-DB52061

Page

1. Unpacking Your Fan.

Carefully open the packaging. Remove items from

Styrofoam inserts. Remove motor housing and place on

carpet or styrofoam to avoid damage to finish. Do not

discard fan carton or styrofoam inserts should this fan

need to be returned for repairs.

Check against parts inventory that all parts have been included.

2. Parts Inventory.

Canopy

Canopy Bracket

(find it inside the

canopy)

Down rods

4” and 21”

Down rod cover

Remote and Receiver

w/battery

Motor housing

Light Kit

Blade arms (5)

Blades (5)

Shade

Hardware bag

(15 sets for Blades

assembly)

Balancing kit

Hardware bag

Required bulbs:

Light kit- use – E12, Type B, 40W x 2 (Not Included)

Motor housing-use - E12, Type C, 7W x 4 (Not Included)

Alternative bulbs usage: CFL or LED Bulbs may be used.

Ensure the Max. Wattage indicated on the socket labels is not

exceeded, and verify the bulbs do not get in contact with any metal part of the fan components (shade or motor

housing)

WARNING: DO NOT EXCEED INDICATED BULB WATTAGE

NOTE: Your fan is equipped with a wattage limiter, if you exceed the indicated wattage your ceiling fan will not function.

Note for Stained Glass shade items: the stained glass shade has been protected with mineral oil as part of the

finishing process. Please use a soft dry cloth to remove any excess oil.