Manualshelf

Instructions / Assembly

ManualsBrandsRiver of Goods ManualsCeiling FansHalston 52 in. Blue Tiffany Stained Glass LED Ceiling Fan With Light
12345678910
MODEL
N
O.
:Q
CF‐DB
52061
PAGE
8
3. Install the receiver into the Hanging bracket of the fan.
This unit is to be used for the control of ceiling fan and in an AC120V 60Hz power supply only.
Do not install in damp locations or immerse in water. For indoor use only.
Do not pull on or cut the receiver wire leads shorter.
4. Proceed making the wire connections following this diagram carefully.
CAUTION: Incorrect wire connection would damage the receiver.
Be sure outlet box is properly grounded or that a ground wire (GREEN or bare) is present.
5. Ensure all the wire connectors are securing the wires firmly. It is recommended to apply electrical tape covering
the connector and wires to further secure the connections.
6. The splices, after being carefully made, should be turned upward and pushed carefully up into the outlet box.
7. Then slide the Canopy up covering the Hanging bracket and Remote Receiver as shown. Secure the Canopy to
the Hanging Bracket with the screws and washers provided.