Instructions / Assembly

PAGE 9
MODEL N O. :Q CF‐DB 52061
Important:
Make sure all electrical connections comply with Local Codes or Ordinances and the National Electrical Code. If
you are unfamiliar with electrical wiring, or if the house/building wires are different colors than those referred to
in the instructions, please use a qualified electrician.
10. Blade Assembly.
Time Saver: Washers for blade screws can be set on
each blade screw prior to installing blades.
Locate 15 blade attachment screws and washers in one
of the hardware packs. Hold blade arm up to blade and
align holes. Insert 3 blade attachment screws (along with
washers) with fingers first, and then tighten screws
securely with a philip screwdriver. Repeat procedure for
the remaining blades.
Remove the Blade arm screws and lock washers
from the fan Motor housing and set aside. Then, remove
the Motor shipping pads and discard (see figure to
identify the pads). Align the Blade arm holes with motor
screw holes and
attach the blade arm with lock washers and blade arm
screws. Before securing screws completely, repeat the
procedure with all remaining blade arms. Secure all
screws.