Instructions / Assembly

ASSEMBLY INSTRUCTIONS
1. Carefully lay out all parts in a line on a flat surface.
CAUTION - Refer to the wattage caution label located near the lamp holder for the maximum
wattage-do not exceed the wattage.
2. Install bulb(s) (not included).
WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle.
3. Insert the polarized plug to wall outlet and use the switch to turn on or off the lamp
BASE
Note: 1.This stained glass product has been protected with mineral oil as part of the finishing process.
Please use a soft dry cloth to remove any excess oil.
2. The above diagram illustrates the installation of your new luminaire. This is a representative
drawing and is not intended to match the style of your luminaire.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
MADE IN CHINA